Frequent question: How do I reset my BIOS back to default?

Can you reset bios to default?

Resetting the BIOS



Once you’re in BIOS, you can try to hit either the F9 or F5 keys to bring up the Load Default Options prompt. Clicking Yes will be enough to restore the default settings. This key may be different depending on your BIOS, but it’ll usually be listed at the bottom of the screen.

How do I reset my bios settings?

[Motherboards] How can I restore BIOS settings?

  1. Press Power to turn on the motherboard.
  2. During POST, Press key to enter the BIOS.
  3. Go to Exit Tab.
  4. Select Load Optimized Defaults.
  5. Press Enter to default settings.

How do I reset my bios settings to default without display?

NEVER boot your system back up with the jumper on pins 2-3 NEVER! You must power down move the jumper to pins 2-3 wait a few seconds THEN move the jumper back to pins 1-2. When you boot up you can then go into the bios and select optimized defaults and change what ever settings you need from there.

What are default BIOS settings?

Your BIOS also contains a Load Setup Defaults or Load Optimized Defaults option. This option resets your BIOS to its factory-default settings, loading default settings optimized for your hardware.

How do I reset my BIOS battery?

To reset the BIOS by replacing the CMOS battery, follow these steps instead:

  1. Shutdown your computer.
  2. Remove the power cord to make sure that your computer receives no power.
  3. Make sure you’re grounded. …
  4. Find the battery on your motherboard.
  5. Remove it. …
  6. Wait 5 to 10 minutes.
  7. Put the battery back in.
  8. Power on your computer.

When should you reset your BIOS?

When do you need to reset your BIOS settings? For most users, BIOS issues should be uncommon. However, you may need to reset your BIOS settings to diagnose or address other hardware issues and to perform a BIOS password reset when you’re having trouble booting up.

How do I boot into BIOS?

Get ready to act quickly: You need to start the computer and press a key on the keyboard before the BIOS hands over control to Windows. You have only a few seconds to perform this step. On this PC, you’d press F2 to enter the BIOS setup menu.

How do I fix corrupted BIOS?

You can do this one of three ways:

  1. Boot into the BIOS and reset it to the factory settings. If you are able to boot into the BIOS, go ahead and do so. …
  2. Remove the CMOS battery from the motherboard. Unplug your computer and open your computer’s case to access the motherboard. …
  3. Reset the jumper.

How do I fix BIOS not booting?

If you cannot enter the BIOS setup during boot, follow these steps to clear the CMOS:

  1. Turn off all peripheral devices connected to the computer.
  2. Disconnect the power cord from the AC power source.
  3. Remove the computer cover.
  4. Find the battery on the board. …
  5. Wait one hour, then reconnect the battery.

How do I reset my UEFI BIOS?

How do I reset my BIOS/UEFI to default settings?

  1. Press and hold the power button for 10 seconds, or until your system shuts completely down.
  2. Power on the system. …
  3. Press F9 and then Enter to load the default configuration.
  4. Press F10 and then Enter to save and exit.

What is UEFI mode?

The Unified Extensible Firmware Interface (UEFI) is a publicly available specification that defines a software interface between an operating system and platform firmware. … UEFI can support remote diagnostics and repair of computers, even with no operating system installed.

Like this post? Please share to your friends:
OS Today