What key do I press to enter the BIOS at startup?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How can you access BIOS at startup?

Method 2: Use Windows 10’s Advanced Start Menu

  1. Navigate to Settings.
  2. Click Update & Security.
  3. Select Recovery in the left pane.
  4. Click Restart now under the Advanced startup header. Your computer will reboot.
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Click UEFI Firmware Settings.
  8. Click Restart to confirm.

How do I enter BIOS on Windows 10?

How to enter the BIOS on a Windows 10 PC

  1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
  2. Select Update & Security. …
  3. Select Recovery from the left menu. …
  4. Click Restart Now under Advanced startup. …
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Select UEFI Firmware Settings. …
  8. Click Restart.

How can I enter BIOS if F2 key is not working?

If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.



  1. Go to Advanced > Boot > Boot Configuration.
  2. In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
  3. Press F10 to save and exit BIOS.
See also  Frequent question: What does the iOS 14 update do to your phone?

How do I change BIOS settings?

How Do I Completely Change the BIOS on My Computer?

  1. Restart your computer and look for the keys–or combination of keys–you must press to access your computer’s setup, or BIOS. …
  2. Press the key or combination of keys to access your computer’s BIOS.
  3. Use the “Main” tab to change the system date and time.

How do you set BIOS to default setting?

Reset the BIOS to Default Settings (BIOS)

  1. Access the BIOS Setup utility. See Accessing BIOS.
  2. Press the F9 key to automatically load the factory default settings. …
  3. Confirm the changes by highlighting OK, then press Enter. …
  4. To save the changes and exit the BIOS Setup utility, press the F10 key.

What is the boot menu key for Windows 10?

The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

How do I get to the boot menu in Windows 10?

I – Hold the Shift key and restart



This is the easiest way to access Windows 10 boot options. All you need to do is hold down the Shift key on your keyboard and restart the PC. Open up the Start menu and click on “Power” button to open power options.

Why do I have to press F2 on startup?

If new hardware was recently installed in your computer, you may receive the prompt “Press F1 or F2 to enter setup”. If you receive this message, the BIOS needs you to verify the configuration of your new hardware. Enter the CMOS setup, verify or change your hardware settings, save your configuration, and exit.

See also  What are the steps of Linux boot process?

What is F12 boot menu?

If a Dell computer is unable to boot into the Operating System (OS), the BIOS update can be initiated using the F12 One Time Boot menu. … If you see, “BIOS FLASH UPDATE” listed as a boot option, then the Dell computer supports this method of updating the BIOS using the One Time Boot menu.

What to do if F12 is not working?

Resolve unexpected Function (F1 – F12) or other special key behavior on a Microsoft keyboard

  1. The NUM LOCK key.
  2. The INSERT key.
  3. The PRINT SCREEN key.
  4. The SCROLL LOCK key.
  5. The BREAK key.
  6. The F1 key through the F12 FUNCTION keys.
Like this post? Please share to your friends:
OS Today