Quick Answer: How do I enter bios on HP?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I get into the BIOS on an HP?

Access the BIOS Setup Utility using a series of key presses during the boot process.

  1. Turn off the computer and wait five seconds.
  2. Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens.
  3. Press f10 to open the BIOS Setup Utility.

How do I enter BIOS setup?

How to enter the BIOS on a Windows 10 PC

  1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
  2. Select Update & Security. …
  3. Select Recovery from the left menu. …
  4. Click Restart Now under Advanced startup. …
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Select UEFI Firmware Settings. …
  8. Click Restart.

How can I enter BIOS if F2 key is not working?

If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.



  1. Go to Advanced > Boot > Boot Configuration.
  2. In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
  3. Press F10 to save and exit BIOS.

How do I get into BIOS on Windows 10 hp?

To open the BIOS Setup utility, turn on the computer and immediately press the F10 key repeatedly, about once every second, until the BIOS setup utility screen opens.

How do I close BIOS setup?

Press the F10 key to exit the BIOS setup utility. In the Setup Confirmation dialog box, press the ENTER key to save the changes and exit.

How do I enter BIOS on Windows 10?

Method #2: Use Windows 10’s start menu

  1. Access your Windows settings. Navigate to your Windows start menu and select “Settings” located on the left panel. …
  2. Select “Update & security” …
  3. Select “Recovery”
  4. Click “Restart now” …
  5. Select “Troubleshoot” …
  6. Confirm your restart.

How do I change my BIOS settings?

How to Configure the BIOS Using the BIOS Setup Utility

  1. Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
  2. Use the following keyboard keys to navigate the BIOS Setup Utility: …
  3. Navigate to the item to be modified. …
  4. Press Enter to select the item.

What key do I press for BIOS?

Common keys to enter the BIOS are F1, F2, F10, Delete, Esc, as well as key combinations like Ctrl + Alt + Esc or Ctrl + Alt + Delete, although those are more common on older machines. Also note that a key like F10 might actually launch something else, like the boot menu.

What is F12 boot menu?

If a Dell computer is unable to boot into the Operating System (OS), the BIOS update can be initiated using the F12 One Time Boot menu. Most Dell computers manufactured after 2012 have this function and you can confirm by booting the computer to the F12 One Time Boot menu.

Like this post? Please share to your friends:
OS Today